Coarse adjustment

• The roller brackets can be set in one of the three positions.
• Start of the season for higher grass (and bumpy lawns)
• Height of cut setting for medium high grass (ideal to be used most of the year)
• For a short finish, if conditions allow (and for reasonably flat lawns) If your lawn should be too dry, please raise the height of cut setting.
• To change the height of cut setting remove the wingnut and the bolt.
• Reposition the bolt for the required height of cut.
• Afterwards, refit the wingnut again.

Fine adjustment

• Slacken the wing nut on both sides of the mower a little.
• Move both roller brackets equally to the required height of cut.